Designed for Ease of Installation!
National Fence Systems, Inc. has engineered the Intrepid Line for efficient, trouble-free installation. All of our sections are shipped FULLY ASSEMBLED; and all brackets are mounted to POSTS as a standard. Enhance the beauty and value of your property with a long lasting, maintenance-free Ornamental Steel Fence!

Specifications

• Material -- Picket, Rails, Posts
• Vertical Steel Pickets are made of hot rolled structural steel with a minimum tensile strength of 45,000 psi. Pickets are manufactured as per ASTM A513 and hot dipped galvanized as per ASTM A525-G90.
• Space between pickets shall be 3.9375" (10.001cm) face to face.
• Horizontal Steel Rails are made of roll-formed structural steel with a minimum tensile strength of 45,000 psi. into a channel. Rails are manufactured as per ASTM A513 and hot dipped galvanized as per ASTM A523-G90.
• Steel Posts are made of hot rolled structural steel with a minimum tensile strength of 45,000 psi. Posts are manufactured as per ASTM A513 and hot dipped galvanized as per ASTM A525-G90.

Accessories

All Decorative Finials, Rings, Lettering, Post Caps, Ball Caps and Scrolls are made die cast aluminum, per ASTM A319.


Fabrication

Rails are punched to allow pickets to pass through the rail. The number of rails vary with style, height and strength as determined by National Fence Systems, Inc.

Pickets, as a standard, are riveted or may be, as an option, welded to rails. Pickets are riveted to rails using a 1Ú4" industrial aluminum drive rivet.

All fence sections, gates and posts are shipped fully assembled; posts having the rail brackets attached first and then polyester coated after fabrication. No assembly is required. Unassembled sections and blank posts are available upon request.

Posts are manufactured with post rail brackets mounted for easy installation. The post rail bracket is fastened to each end, line, and/or corner post and is polyester coated after fabrication.

Gates are fabricated using the same components as for the complete fence system. All Gates are welded first and then polyester powder coated after fabrication. Type of gates available: single, double drive, and cantilever aluminum track. Hinges and latches are fitted according to gate size and mode of usage. Various Gate operators can be installed on all gates.


Finish

All fence components have a galvanized undercoat, inside and outside all members, to insure maximum corrosion resistance.
The complete fence system is coated using our environmentally approved Kolor KingTM Super Durable High Performance Powder Coating process (see Kolor King Coating ).


Installation

Gate posts should be posted according to gate openings specified. Fence Posts are to be set at a spacing of either 71" for 6' o.c nominal or 95.5" for 8' o.c. nominal with 2.5" square posts. Fence Panels should be attached into the mechanically fastened post rail bracket on each post and fastened with aluminum industrial drive rivets. Adjustable angle brackets available for installation on uneven terrain.


Manufacturer

National Fence Systems, Inc.,
1033 Route 1 South,
Avenel, New Jersey 07001.
1-877-484-6953.


Residential and Industrial Fencing

Strength, durability, beauty and affordability. These are the qualities that have attracted design professionals to our Ornamental Steel Fencing for more than 20 years.

Our steel fences provide an elegant and affordable alternative to wrought iron. Installation is quick and easy because we ship our fence sections fully assembled, with rail brackets mounted to posts. Pickets are attached to the rails with industrial drive rivets, which add strength and stability, while allowing racking to accommodate uneven ground surface. The INTREPID line features the flexibility of 10 popular two, three, and four rail design styles to choose from – all in a variety of standard heights and colors. Standard sections come in 6’ and 8’ lengths. Most of our standard styles are constructed to meet BOCA codes. We also provide custom options such as convexing, concaving, decorative finials, post caps, and scrolls.

Custom heights and lengths, as well as all-welded sections are also available.